Harken Mainsheet Traveler — High-Load Car, 5 ft Track, Off an Ericson 25 Plus

Complete Harken mainsheet traveler system, removed from an Ericson 25 Plus. Genuine Harken hardware throughout — the high-load car is marked Harken and the stainless car body, cam cleats, and sheaves are all in the photos.

What’s included

• Harken traveler track, about 5 ft long (the tape in the photos reads about 60 in end to end)
• Harken high-load traveler car with built-in cam cleats and control sheaves at both ends, and the mainsheet attachment eye in the center
• End stops / end controls with sheaves at both ends of the track
• The control lines on it now, as shown — they are weathered and ready to be replaced

Condition: used, exactly as removed from the boat. It is dirty from life outdoors, the lines are green and worn, and the anodizing shows wear — what you see in the photos is the exact unit you will receive. Plan on a good cleaning and new control lines.

Fit note: this is the complete system as it came off an Ericson 25 Plus. If you need the exact track width before buying, send us a message and we will put a caliper on it.

Questions? Call or text Run Aground Boat Works at (864) 359-9438.